Tjernlund PAI-1 & 2O Combustion Air In-Forcer 8504038 Rev A 05/01 User Manual

Page 18

Advertising
background image

17

1.) Follow troubleshooting guide to determine defective component. If unable to determine faulty component, contact your

Tjernlund distributor or Tjernlund Products Technical Customer Service Department at 1-800-255-4208 for troubleshooting
assistance.

2.) After the faulty component is determined, return it to your Tjernlund distributor for replacement. Please include IN-FORCER date

code component was taken from. The date code is located on the Electrical Box coverplate. If the date code is older than 18
months you will need to provide a copy of the original installation receipt to your distributor. Credit or replacement will only be
issued to a Tjernlund distributor after the defective part has been returned prepaid to Tjernlund.

COVERED PARTS

Motor

Proving Switch Relay

Indicator Light

Blower Wheel

WHAT IS NOT COVERED

Product installed contrary to our installation instructions
Product that has been altered, neglected or misused
Product that has been wired incorrectly
Product that has been damaged by a malfunctioning or mistuned burner
Any freight charges related to the return of the defective part
Any labor charges related to evaluating and replacing the defective part

IN-FORCER REPLACEMENT PARTS LIST

MOTOR KIT

950-3022

PAI-1 WHEEL KIT

950-0451

PAI-2 WHEEL KIT

950-0457

FAN PROVER KIT

950-0452

RELAY KIT

950-1040

24V INDICATOR LIGHT

950-0455

115V INDICATOR LIGHT KIT

950-0456

IN-FORCER ISOMETRIC PARTS BREAKDOWN

TJERNLUND LIMITED ONE YEAR WARRANTY

Tjernlund Products, Inc. warrants to the original purchaser of this product that the product will be free from defects due to faulty material or workmanship for a period of (1) year from the date of orig-
inal purchase or delivery to the original purchaser, whichever is earlier. Remedies under this warranty are limited to repairing or replacing, at our option, any product which shall, within the above stat-
ed warranty period, be returned to Tjernlund Products, Inc. at the address listed below, postage prepaid. THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE
FACE HEREOF, AND TJERNLUND PRODUCTS, INC. EXPRESSLY DISCLAIMS LIABILITY FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OF THIS PRODUCT.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES AND NO AGENT IS AUTHORIZED TO ASSUME FOR US ANY LIABILITY ADDITIONAL TO THOSE SET FORTH IN THIS
LIMITED WARRANTY. IMPLIED WARRANTIES ARE LIMITED TO THE STATED DURATION OF THIS LIMITED WARRANTY. Some states do not allow limitation on how long an implied warranty
lasts, so that limitation may may not apply to you. In addition, some states do not allow the exclusion or limitation of incidental or consequential damages, so that above limitation or exclusion may
not apply to you. This warranty gives you specific legal rights and you may also have other rights which may vary from state to state. Send all inquires or products requiring warranty work to Tjernlund
Products, Inc. 1601 9th Street, White Bear Lake, MN 55110-6794 Phone (651) 426-2993 • Fax (651) 426-9547 or email us at [email protected].

NOTE:
For pull-down servicing feature of
IN-FORCER, remove six (6)
screws from bottom front and
sides of IN-FORCER while holding
blower assembly firmly. Carefully
slide blower assembly down until
stops hold in place.

Advertising
This manual is related to the following products: