Vintage Cellars Slimline 2500 - Manual (Page 14)

SL 033114
Page 12 | 1-800-343-9463
INSTALLATION
Determine which of the four bracket
mounting options (displayed in Figure 1) will
be the most suitable for the desired position
of the Cooling Unit.
The Foam Tape needs to be placed on the Bracket surfaces that
will be in direct contact with the wall.
If the desired option is (A) or (B) displayed in (Figure 1), the Foam
Tape should be placed as shown in (Figure 2).
If the desired option is (C) or (D) displayed in (Figure 1), the Foam
Tape should be placed as shown in (Figure 3).
Secure each Bracket to its corresponding side of the
Cooling Unit as displayed on your left hand side.
Mounting
Options
Figure 1
Figure 2
STEP 5
STEP 4
STEP 6
Figure 3
A
B C
D