Vintage Cellars FGD-0400 - Manual (Page 110)

Sensaphone
®
Model 400 User’s Manual
107
����
���
���
���
���
���
����������
������������������������
�����
������������
���
�����
�
�
���������������
�����
��������������� ��������������� ��������������� ����������������
����
���
�
�
Step 4: Program the Thermostat.
Refer to the manufacturers instructions for programming the
thermostat. Be sure to program settings for both normal and
vacation modes.
Controlling the Thermostat
The operating mode of the thermostat (normal/vacation) can be
controlled at the Model 400 keypad or remotely via Touch-Tone
comands. Both methods are described below:
Keypad commands:
1) To enable Vacation Mode, press the [SENSOR ON/OFF] key,
then the [OUTPUT] key. The unit will respond by saying “ON”
to indicate that Vacation Mode is set. The Suitcase icon
will appear and blink on the thermostat LCD.
2) To enable Normal Mode, press the [SENSOR ON/OFF] key,
then the [OUTPUT] key. The unit will respond by saying “OFF”
to indicate that Normal Mode is set. The Sun
or Moon
icon will appear on the thermostat LCD.