7 obtaining current temperature, 2 interrogating temperature calibration, Press enter. the model 400 responds: “enter – Vintage Cellars FGD-0400 User Manual
Page 81: Press what is, Press calibrate, Press test °f/°c, Chapter 5: alarm programming 78
5. Press ENTER. The Model 400 responds:“Enter.”
ENTER
PM
NOTE
If you find that your calibration offset exceeds more
than + 5 or –5 degrees, other complicating factors
could be affecting normal operation of the Model
400. Call Sensaphone for technical assistance.
5.6.2 Interrogating Temperature Calibration
1. Press WHAT IS.
WHAT
IS
2. Press CALIBRATE.
6
CALIBRATE
3. Press the number key corresponding to the selected
temperature zone.
4
MAX CALLS
3
INTERCALL
TIME
1
CALL
DELAY
2
VOICE
REPS
5.7 Obtaining Current Temperature
Current temperature readings for each temperature zone may be
accessed at any time. The Model 400 recites the zone number,
and the actual temperature detected by the attached sensor, for all
zones configured as temperature. To obtain current temperature:
1. Press WHAT IS.
WHAT
IS
2. Press TEST °F/°C.
TEST
°F/°C
#
Chapter 5: Alarm Programming
78