Vinten Radamec Free-d - Manual (Page 5)

Vinten Broadcast Ltd free - d ™ Installation Manual V1.4.4
Page 5 of 46
2 System components
Supplied items:
Part Number Description
101-072-0002 free-d™ Target Seeking Camera (TSC)
Various Camera adapter bracket (to attach TSC to studio
camera)
012-037-0020 TSC power cable (standard length 20m)
195-112-0002 TSC power supply
177-072-0001 free-d™ Processor
Various Lens encoder
N/A Mains cables (2 per camera system)
Various Upper and lower targets (of roughly equal quantity)
N/A 3.5 inch floppy disk containing free-d™ lens calibration
Required items not supplied:
•
Genlock source (if Free-d unit is not polled by VR system)
•
Genlock video cable
•
TSC video cable (length as required)
•
Oscilloscope (for calibration purposes only)
•
NTSC composite video monitor (for calibration purposes only)
•
PC laptop* (for calibration purposes only)
•
RS422/232 converter* (for calibration purposes only)
•
9 way pin-to-pin D-type serial cable* (for calibration purposes only)
Note: items marked with * will be provided by the Vinten Radamec Engineer
for the duration of the on-site system commissioning.