Vinten Radamec Fusion FBH-175 - Manual (Page 11)

10
Usage
The Fusion FBH-175 height drive is designed for use in television studios to remotely drive specified manual
studio pedestals over their full height range with on-shot quality of movement.
Fusion FBH-175 height drives are intended to be used by television camera operators.
WARNING! 1. Do NOT attempt to use this product if you do not understand how to
operate it. Only trained operators should use the pedestal.
2. Do NOT use this product for any other purpose than that specified in the
Usage statement above.
3. Maintenance beyond that detailed in this Operators Guide must be per-
formed only by competent personnel in accordance with the procedures
laid down in the Maintenance Manual.
4. Display prominent warning signs in studios alerting personnel that
robotic equipment is present and may move without warning.
5. Only operate the height drive remotely if you are able to see the pedestal,
to avoid obstacles and collision hazards.