Welch Allyn MicroTymp 3 portable tympanometric instrument - User Manual User Manual
Page 46
46
Printing 226-Hz results
Welch Allyn MicroTymp3 portable tympanometric instrument
Print interpretive messages (Switch #2)
Print tympanogram only or tympanogram and data (Switch #3)
Manufacturing switch (Switch #4)
No messages
Depress the ON portion of the switch to select this option.
This causes messages which interpret the tympanogram to
not be included on the printout.
Refer to the Printout formats section on
for more
information on these messages.
Messages
Depress the OFF portion of the switch to select this option.
This causes the messages which interpret the
tympanograms to be included on the printout.
OFF
1
2
3
4
1
2
3
4
OFF
Tympanogram only
Depress the ON portion of the switch to select this option.
Only the tympanogram and the GR (Width) numeric value will
print.
Tympanogram and data Depress the OFF portion of the switch to select this option.
Both the tympanogram and its corresponding numeric data
will print.
1
2
3
4
OFF
1
2
3
4
OFF
This switch is used during manufacturing only. Leave this
switch in the OFF position. The Printer/Charger will not
operate normally if this switch is on.
1
2
3
4
OFF