Welch Allyn Connectivity Server - Programmers guide - Manual (Page 45)

6
41
Inbound ADT HL7 messages
If your facility includes the WACS Inbound HLT ADT Data module, patient information
fields in Acuity System patient identification windows can autopopulate with admit/
discharge/transfer (ADT) data from your CIS.
The information in this chapter is organized as follows:
Overview: Inbound HL7 ADT Data module . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
How an Acuity System uses ADT information . . . . . . . . . . . . . . . . . . . . . . . . . .43
ADT messages accepted and stored by WACS . . . . . . . . . . . . . . . . . . . . . . . . .46
Examples of ADT messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .52
Reconfiguration of ADT services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .54