Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 30)

24
!
Caution
Handle the Bedside Unit with care.
Do not drop, bang or shake the Bedside Unit. Rough handling
can break the internal circuit boards.
Figure 9: Positioning the Sensor and Bedside Units
Turning the System On/Off
Turn the EarlySense System "ON" by pressing the On/Off button on the front of the
Bedside Unit (See Figure 5). The Admit Window will automatically appear. After
admitting the patient, the Home Screen will be displayed.
To turn the system off, press the On/Off switch on the front of the Bedside Unit. You will
be asked if you are sure you want to turn the system off. Confirm turning off by hitting
Yes on the touch screen.
Electrical Failure
In case of electrical failure, the internal system battery allows the system to function for
approximately 30 minutes.
Check that the problem is not with the system itself by verifying that the power cable is
not damaged and is connected both to the Electrical Outlet and to the Bedside Unit.