Welch Allyn EarlySense System 1.0 - Equivalent to model EverOn 1.0 - User Manual - Manual (Page 35)

29
Choose Done to finish admitting the patient, or Cancel to return to the Home screen
without admitting the patient. If after 10 minutes you have not pressed a button the
screen will close automatically without admitting the patient.
5. After pressing Done, you will be asked two setting questions. The first is whether
you want to set a Bed Exit alert for this patient (Figure 14). If you choose Yes, the
Bed Exit alert will be enabled automatically with the default setting of sensitivity
level. If you choose No, the Bed Exit alert will be disabled. After answering the first
question, you will be asked whether you want a Patient Turn reminder for this patient
(Figure 15). If you choose Yes, the Patient Turn Counter will be enabled
automatically with the default setting of a reminder every 2 hours, and if you choose
No, the Patient Turn Counter will be disabled. If after 1 minute you have not pressed
a button the screen will close automatically, the patient will be admitted and the Bed
Exit alert and the Patient Turn Reminder will remain disabled.