Welch Allyn 246 Propaq CS Vital Signs Monitor v.3.7X - User Manual User Manual
Propaq, Cs vital signs monitor
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- Directions for Use
- General information
- Setup
- Monitoring
- Perform ECG/RESP monitoring
- Using the Propaq CS monitor with pacemaker patients
- Perform Invasive Blood Pressure (IBP) monitoring
- Take a Noninvasive Blood-Pressure (NIBP) reading
- Perform temperature monitoring
- Perform SpO2 monitoring
- Perform Mainstream CO2 monitoring
- Perform sidestream CO2 monitoring
- Set up the CO2 display and alarm limits
- Alarms & Alerts
- Description of alarm and alert tone patterns
- Silence an active alarm or alert tone for 90 seconds
- Inhibit alarm and alert tones for four minutes: 4 MIN SUSPND
- Inhibit alarm and alert tones indefinitely: ALL ALARMS
- Summary of alarm and alert keys and Acuity Central Station messages
- Customize alarm limits based on patient’s current vital signs
- Alarm holdoffs
- Connect nurse call option
- Troubleshooting equipment alert messages
- Printing & trends
- Acuity
- Maintenance
- Avoid electrostatic discharge
- Connect the AC power adapter to recharge the battery
- Replace monitor input power fuse
- Install printer paper
- Inspect and clean the monitor and accessories
- Service interval recommendations
- Recycling monitor components
- Extended storage precautions
- Change the Wireless Propaq CS network name
- Reference
- Compliance
- Index