New location for the all alarms key, Respond to equipment alerts – Welch Allyn Propaq CS Monitor - User Manual User Manual
Page 15
Update to Directions for Use
English Update: Propaq CS Monitor
7
New Location for the ALL ALARMS Key
The ALL ALARMS key has been relocated to the Settings Menu under the Service Menu.
Respond to Equipment Alerts
SETUP
NIBP
ECG/
RESP
INVASIVE
PRESSURE
SpO2/
CO2
SETUP MENU 1
MORE
ALARMS
TRENDS
WAVE SEL
STATSCALE
MORE
NIBP
TEST
IBP
TEST
SpO2
TEST
CO2
TEST
MORE
NEXT
CHANGE
WAVE
SELECT
PRINTER
SERVICE MENU 1
TEMP
TEST
PIXEL
TEST
PCMCIA
TEST
SERVICE MENU 2
MORE
SETTINGS
SCREEN
CAL
SYSTEM
RADIO
SERVICE MENU 3
NET
TEST
NEXT
UP
DOWN
ENTER
TIME/DAY MENU
PREVIOUS
MENU
NEXT
CHANGE
ALL
ALARMS
SETTINGS MENU
SETUP MENU 2
MORE
SERVICE
WAVE
SELECT
ACUITY
MAIN MENU
To access the ALL ALARMS key,
press
SETUP, MORE, MORE,
SERVICE, YES, MORE, MORE,
SETTINGS, ALL ALARMS.
Note
If multiple equipment alerts occur simultaneously, the Propaq monitor displays a
MULTIPLE EQUIPMENT ALERT message. In certain situations, such as when a
channel is disabled, the source of the second alert is not displayed in the new
message. Look for blank numeric and waveforms areas on the screen to identify
the source(s) of multiple alerts.