Welch Allyn Solarc Light Source - User Manual User Manual
Page 18
16
Chapter 3 Maintenance
Welch Allyn Light Source
2. Clean the external surfaces with a cloth dampened with mild
soap and water or use the following cleaning/disinfecting
solutions. Always follow the manufacturer’s
recommendations.
•
A quaternary ammonium disinfectant such as Cavicide
®
•
A phenol, alcohol-based spray such as Lysol
®
brand
disinfectant
•
Gluteraldehyde
•
70% isopropyl alcohol
•
10% mild bleach solution
•
Metracide
•
10% Wescodyne
•
Banicide
•
Wavecide-01
If there are any questions, please contact Customer Service.
3. The power cord may be wiped clean using the same cleaning/
disinfecting solutions listed above. Wipe dry with a clean
cloth. Care must be taken not to get the plug prongs wet.
DO NOT IMMERSE.
4. Do not plug the unit into a wall outlet until it is thoroughly dry.