Welch Allyn Solarc Light Source - User Manual - Manual (Page 9)

Directions for Use Chapter 1 Introduction 7
WARNING PROVIDE ADEQUATE VENTILATION TO
PREVENT OVERHEATING. Do not cover or drape
this light source. Provide a 3 inch (7.62 cm) distance
between the Welch Allyn Light Source and any solid
objects.
WARNING Use only non-electrically conductive
fiber bundles. Use of conductive fiber bundles will
compromise the safety and effectiveness of this device.
WARNING RISK OF SHOCK. Do not operate the
Light Source without a lamp installed. Disconnect
power before attempting to change the lamp.
WARNING This product comes with a power cord that
is intended for use only with this product. The power
cord has not been tested and approved for use with
other products that may have the same power
connectors. If you cannot locate the original power cord,
please contact Welch Allyn to obtain replacement parts.