Cobra Electronics MC600Cx EN - Manual (Page 13)

8 Owner's Manual
have activated the menu from the CHART Page (by pressing the MENU
button) to select the option you want, “NUMBER OF DATA FIELDS” option,
follow the procedure listed below:
1. Use the UP and DOWN CURSOR buttons to select the desired option,
“NUMBER OF DATA FIELDS”.
2. Press the ENTER button: a drop down box appears with the available
selections “2”, “4”, “6”, “HIDE”.
3. Use the UP and DOWN CURSOR buttons to select a desired choice.
4. Press the ENTER button to confirm, or the ESC button to abort and return
to the previous settings.
Pressing the RIGHT CURSOR button will sometimes perform like the ENTER button
during this operation.
1.2.4. Alphanumeric Input Procedure
Information is keyed into the chartplotter for example when editing a Waypoint
(see the following picture), or when entering Setup information.
General Operation