Cobra Electronics MC600Cx EN - Manual (Page 26)

Nothing Comes Close to a Cobra ® 21
3. PAGE INFORMATION AND OPERATION
3.1. PAGE SELECTION AND PRESETS - SETUP
Any page can be turned ON or OFF using the following procedure:
1. Press the PAGE button several times to select “SYSTEM” and then press
the ENTER button.
2. Use the UP and DOWN CURSOR buttons to select the “PAGES ON/
OFF” option and then press the ENTER button.
3. Press the ENTER button to change the page status (On or Off).
4. Press one of the bottom software buttons to assign it as a short cut to the
desired page. The RIGHT and LEFT CURSOR buttons can also be used
to change the selection if the page has already been assigned a button.
During future operations the ON pages can be selected using the PAGE
button which is generally used to scroll through all available pages.
Pages containing certain data like the Fish Finder and Combo are not accessible
unless that optional module is connected.
Press and hold one of the software buttons from any of the main pages to save that
as one of quick access pages.
Page Selection and Presets