Cobra Electronics MC600Cx EN - Manual (Page 65)

60 Owner's Manual
5. SYSTEM PAGE SETTINGS
5.1. SCREEN SHOT AND DESCRIPTIONS
1. Press the PAGE button several times to select “SYSTEM” and press the
ENTER button. The SYSTEM Page appears on the screen:
5.2. OPERATIONS BY SETTING GROUP
After the SYSTEM Page is shown, use the CURSOR buttons to select the
menu you want and press the ENTER button. The available menus are listed
in the following paragraphs.
5.2.1. Display Settings
Controls the setting of the chartplotter video screen.
“BACKLIGHTING LEVELS”: Sets the desired level for backlighting.
“CONTRAST LEVELS”: Sets the desired level for contrast.
“COLOR PALETTE”: Sets the palette used to enhance the visibility of the
screen depending on the surrounding light condition. The possible choices
are SUNLIGHT, NORMAL, CLASSIC, NOAA, and NIGHT. SUNLIGHT is
designed to enhance the visibility of the screen when the chartplotter is
exposed to the sunlight. The maps are much brighter than in the other
modes and the depth areas are filled with white color so different depth
areas are not easily distinguishable. NORMAL is recommended when the
chartplotter is not exposed to the direct sunlight. When this mode is set the
maps are displayed in order to use colors as similar as possible to the
ones used in the original paper charts. CLASSIC uses more vivid colors.
NOAA allows setting NOAA paper chart colors presentation. NIGHT is
recommended when the environment is dark in order to reduce the glare of
System Page
Display Settings