Cobra Electronics MC600Cx EN - Manual (Page 24)

Nothing Comes Close to a Cobra ® 19
2.10. USING GOTO
The GOTO function allows instant plotting of course to selected target. After
pressing the GOTO button on most of the pages, the sub-menu on a Pointer
position appears and it is possible to choose beneath mentioned options:
“GOTO POINTER” - Sets the Pointer location as the destination.
“GOTO POINT” - Shows the “User Point” list, that gives information on all
stored User Points.
“FOLLOW ROUTE” - Brings up the “Select Route” list with the most
recently used highlighted.
“NEW ROUTE” - Brings up the “Selected Route” list but with the next
open Route highlighted. Software button choices are: E
DIT
, A
CCEPT
.
“NEW WAYPOINT” - A new Waypoint is created and set as the
destination Waypoint.
“NEW MARK” - A new Mark is created.
“MOB” - Man OverBoard (MOB) function. See Par. 2.12 for details.
“FIND” - Find function. See Par. 2.11 for details.
2.11. USING FIND
The Find function allows searching for the nearest Ports, Port Services, Tide
Stations, Wrecks, Obstructions loaded on the C-CARD or it centers the screen
over a selected User Point or at desired Coordinates. When you press the
FIND button (or choose Find from a menu option) a list of available objects to
search is shown.
A Warning message is shown when activating the Find function if no C-CARD
inserted.
Using Goto and Find