Cobra Electronics MC600Cx EN - Manual (Page 25)

20 Owner's Manual
2.12. USING MOB
If a person or object is lost overboard and you need to return to the location,
use the MOB (Man OverBoard) function. This function enables you to
simultaneously mark and set a course to a location for quick response to
emergency situations.
To activate the MOB function, a valid GPS fix must be available.
2.12.1. Inserting MOB
To activate a MOB function follow the procedure below:
1. Press the MOB button. A dialog box with a message “MOB is activated”
will appear on a screen and a MOB Waypoint will be created.
2. If the NMEA output is turned On, the warning dialog box is given: “Turn off
autopilot before setting MOB point as destination”
2.12.2. Deleting MOB
To cancel the MOB function
1. Use the CURSOR button to move the Pointer over the MOB icon.
2. Choose the D
ELETE
or S
TOP
N
AV
software buttons at the bottom of the
display.
Using MOB