Set up the braun thermoscan® pro 4000 thermometer – Welch Allyn Connex Integrated Wall System Start Up Guide - Installation Guide User Manual
Page 19
Advertising
Startup guide
Setup
15
Set up the Braun ThermoScan® PRO 4000 thermometer
If your system is configured for the Braun ThermoScan thermometer, follow these setup
instructions.
1.
Remove the thermometer from the package and discard the protective casing. Then
open a box of probe covers and place it in the dock.
2.
Remove the thermometer cover, insert the battery, replace the thermometer cover,
then place the thermometer in the dock.
20
Probe Covers
Advertising