Welch Allyn Connex Integrated Wall System Start Up Guide - Installation Guide - Manual (Page 5)

1
1
Setup
Unpack the wall system
This procedure applies to first-time setup of the wall system.
1. Lift the wall system out of the box by the cardboard handles.
Caution Welch Allyn is not responsible for the integrity of any wall mounting
interface. Welch Allyn recommends that you contact your Biomedical
Engineering Department or maintenance service to ensure professional
installation, safety, and reliability of any mounting accessory.
Note Some product features described in this publication might not be available in your
country. For the latest information about products and features, please call Welch
Allyn Customer Care.
Caution You must follow these instructions exactly to ensure safety and ease of
assembly.
Caution Do not remove any packing materials around the wall system until the
instructions tell you to do so.