Welch Allyn VSM300 Upgrade, 810-2183-01C - Installation Guide - Manual (Page 13)

Software Upgrade Installation Guide Chapter 2 Upgrade Procedure 9
2. The Enter Customer Information window appears each time a monitor is updated. If
the web confirmation number or the sales order number is unavailable, enter None. If
information has changed since the last Welch Allyn upgrade, edit fields as needed.
When all information is current, click OK.
3. If a new temperature module has been added to the monitor, the following dialog
appears:
• Click Yes to accept the new temperature module and upgrade the software.
• Click No to accept the new temperature module without upgrading any software.
• Click Cancel to return to the main window without making changes.
4. Upgrading the Main and NIBP software takes approximately 20 minutes. Updating the
monitor to accept a new temperature module without installing any software takes
less than a minute.
Note All fields must be filled before you can continue.
Note The tool controls the On/Off function of the monitor and upgrades the monitor as
needed, depending on the installed hardware and software versions.