Dell Inspiron 5000e - Manual (Page 52)

^I h INT: Wait for the
computer to enter standby
mode before removing the
device. The computer is in
standby mode when the power
light flashes.
In Microsoft Windows 98 or Windows Me
1 Right-click the Softex BayManager icon on the Microsoft Windows
taskbar.
2 Click Remove/Swap.
3 Close the display and turn the computer over.
4 Slide and hold the latch release and pull the module out.
5 Insert the new device and push it until you hear the latch replease click.
6 Click OK.
In Microsoft Windows 2000
1 Double-click the Unplug or Eject Hardware icon on the Microsoft
Windows taskbar.
2 Click the device you want to eject and then click Stop.
3 Click OK to prepare the device and activate standby mode.
4 Close the display and turn the computer over.
5 Slide and hold the latch release and pull the device out.
6 Insert the new device and push it until you hear a click.
7 Press the power button to resume from standby.
8 Typ
e in your password to unlock your computer.
9 When Windows resumes and recognizes the new device, click Close.
Installing a Battery
^HINT: You can also install
a second battery in the modular
bay (see page 54).
Kf NOTICE:
Your battery is designed to work only with Dell Inspiron 5000 series
computers. Using other batteries may damage your computer.
1 Save and close any open files, exit any open application programs, and
shut down the computer (see page 20).
2 If the computer is attached (docked) to a port replicator, undock it (see
p a g e 58 ) .
5 ^ I A d d i n g P a r t s