Dell PowerEdge 2600 User Manual
Page 14
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2
Remove the system eover and set it aside (see Figure 1-5):
a Loosen the three thumbserews on the front of the system (see Figure 1-5).
Figure 1-5. Removing the System Cover
b Slide the system eover baek and grasp the eover at both ends (see Figure 1-5).
c Carefully lift the eover away from the system and set it aside.
3
Label eaeh hard drive with its loeation in the ehassis.
*
Remove the hard drives from the system.
5
Remove the 15 T-10 Torx serews that seeure the raek front panel to the ehassis.
6
Lift the raek front panel away from the ehassis and set it aside.
1-10
I R a c k - t o - T o w e r C o n v e r s i o n G u i d e