Cisco 10720 - Manual (Page 21)

21
Electromagnetic Compatibility Regulatory Statements
78-13101-02
Electromagnetic Compliance
You can determine whether your equipment is causing interference by turning it off. If the interference
stops, it was probably caused by the Cisco equipment or one of its peripheral devices. If the equipment
causes interference to radio or television reception, try to correct the interference by using one or more
of the following measures:
• Turn the television or radio antenna until the interference stops.
• Move the equipment to one side or the other of the television or radio.
• Move the equipment farther away from the television or radio.
• Plug the equipment into an outlet that is on a different circuit from the television or radio. (In other
words, make certain the equipment and the television or radio are on circuits controlled by different
circuit breakers or fuses.)
CISPR 22
Warning This is a class A product. In a domestic environment, this product may cause radio interference, in
which case, the user may be required to take adequate measures.
Note For CISPR 22 class B, the use of shielded (i.e. screened) CAT5 or equivalent Ethernet cable is required.
Note This apparatus complies with EN55022 class B conducted emissions requirements on AC main with
unshielded or shielded CAT5 Ethernet cabling (i.e. does not require the use of shielded Ethernet cable
to meet this requirement.)
Canada
English Statement of Compliance
This class A digital apparatus complies with Canadian ICES-003.
French Statement of Compliance
Cet appareil numérique de la classe A est conforme à la norme NMB-003 du Canada.
Europe (EU)
This apparatus complies with EN55022 Class A and EN55024 standards when used as ITE/TTE
equipment, and EN 300 386-2 (EN55022 class B with shielded CAT5 Ethernet cable, non-central office
equipment) for Telecommunications Network Equipment (TNE).
Hungarian Class A Warning
Figyelmeztetés a felhasználói kézikönyv számára: