Cisco 10720 - Manual (Page 2)

2
Overview
78-13101-02
Overview
Electrostatic Discharge, page 4
Rack Mounting Guidelines, page 5
Cisco 10720 Internet Router Setup Checklist, page 8
Installing the Cable-Management System, page 9
Removing the Cable-Management System, page 11
Rack Mounting the Router, page 12
Obtaining Technical Assistance, page 17
• Contacting Cisco, page 17
• Technical Assistance Center, page 18
– Contacting TAC by Using the Cisco TAC Website, page 18
– Contacting TAC by Telephone, page 18
• World Wide Web, page 19
Related Documentation, page 19
Obtaining Documentation, page 19
• Documentation CD-ROM, page 19
• Ordering Documentation, page 19
• Documentation Feedback, page 20
Electromagnetic Compliance, page 20
Translated Safety Warnings, page 23
Overview
The Cisco 10720 Internet Router can be mounted in a variety of ways:
• front, middle or rear rack mounting for:
– 19” EIA
– 23”/24” EIA
– ETSI
• wall mounting
• desk mounting
The cable-management system, located on the front of the Cisco 10720 Internet Router, organizes the
interface cables that lead into and away from the router. To keep the cables free of sharp bends, extend
the cables from the center out both sides of the cable-management tray. Excessive bending in an interface
cable can degrade performance and possibly harm the cable.