Canon BJ-10sx - Manual (Page 37)

Pausing a Print Operation
Feeding Paper
When the ON LINE light is on, the printer is on-line and ready to
receive data from your computer. At this time, you can send print data
from your computer to the printer.
If you want to pause a print operation, press the ON LINE button to set
the printer off-line. The ON LINE light goes off and the printer stops.
To resume printing, press the ON LINE button.
When the printer is off-line, you can use the LF/FF button to advance
the paper in the printer. You can perform a form feed or a line feed, or
you can eject a sheet of paper.
Form feeding
Insert a sheet of paper into the printer, make sure the printer is off-line,
and press the
LF/FF button to load the sheet of paper to its top of form.
Set the printer back on-line to print. (f you are running a software
application, you don't need to perform this step. The application tells the
printer when to load paper.)
Line feeding
When a sheet of paper is loaded and the printer is off-line, press the
LF/FF button to advance the paper one line. Press the button repeatedly
to advance as many lines as you want.
You can use the FWD ADJ or REV ADJ button to adjust the print
position by 1/180 inch. Press the FWD ADJ button to move the paper
forward by 1/180 inch, or press the REV ADJ button to move the paper
backward by 1/180 inch.
Ejecting paper
When you want to eject a sheet of paper, make sure the printer is off-
line and press the
LF/FF button for one second. The printer ejects the
current sheet of paper.