Canon BJ-10sx User Manual
Page 90
Using the Battery Pack
With a fully charged battery pack, you may be able to print up to 40
pages without the use of AC power. The actual printing time depends
on the complexity of the data you are printing.
To charge a battery pack, follow these steps:
1. Make sure the printer is turned off.
2. Turn on the battery switch.
3. Press and hold the
ON LINE
button, and press the
POWER
button. When the printer beeps, release the
POWER
button.
When it beeps again, release the
ON LINE
button. The
POWER
light blinks.
The
POWER
light continues to blink while the battery is charging
(about 10 hours). When the battery is fully charged, the printer
automatically turns off.
To print using battery power, follow these steps:
1. Make sure the AC adapter is disconnected. (When the AC adapter
is connected, the printer will always use AC power.)