Canon BJ-10sx - Manual (Page 79)

BJ-10e Mode
4. After making your selections, close the inner cover and then close
the top cover.
The new DIP switch settings take effect when you turn on the printer.
If you turn off or reset the printer, or if the printer receives the Set
Initial Conditions command from a software program, the printer resets
its functions to the settings defined by the DIP switches.
When the printer is in BJ-10e mode (DIP switch 11 is OFF), you can set
the DIP switches to control the following functions:
DIP
switch
Function OFF ON
1 Automatic sheet feeder Disabled Enabled
2 Text scale mode Disabled Enabled
3 Automatic line feed (LF) Normal CR CR with LF
4 Page length 11 inches
(279 mm) 12 inches
(305 mm)
5 Character set Set 1 Set 2
6 Automatic carriage
return (CR) Normal LF LF with CR
7 Alternate Graphics Mode
(AGM) Disabled Enabled
8 Buffer size Input: 37KB
Download: 0 KB
Input: 3 KB
Download: 34
KB
9 Code page USA 437 Multilingual
850
10 Printer emulation IBM Proprinter
X24E
BJ-130e
11 Printer control mode BJ-10e mode Epson LQ
mode