NextoDI NVS2825 - Manual (Page 26)

45
ADVANCED FUNCTIONS ADVANCED FUNCTIONS
46
16.9. Firmware Update
Select “FIRMWARE UPDATE” from the main
menu.
The firmware file (NVSAIR.BIN) should be
placed in the root directory of a memory card
or the internal hard drive. Select [In HDD]
(hard disk drive) if the firmware file is in the
root directory of the internal hard drive.
Select [In Memory Card] if the firmware is in
the root directory of a memory card. If you
selected the memory card, insert the memory
card into the NVS2825
If a valid firmware file is not contained in the
specified device, the NVS2825 will indicate an
error. Check whether the device contains valid
firmware in the root directory and repeat the
previous process.
If valid firmware is found at the specified
location, the NVS2825 indicates a “FW File
Found” message on the LCD. Confirm the
firmware upgrade by pressing the control key
briefly [S].
232.6 GB
Selct Selct Back Back
Firmware Update
Select a File
in HDD
in Memory Card
232.6 GB
Back Back
Firmware Update
No valid FW Files
232.6 GB
Select Select Cancel Cancel
Firmware Update
FW File Found
Update?
(1.0 1.01)
232.6 GB
Firmware Update
Updating
(1.0 1.01)
232.6 GB
Firmware Update
Update Completed
(1.0 1.01)
The LCD screen indicates that the NVS2825 firmware
is being updated. Do not turn the power off during
the firmware upgrade. Use of the AC power adapter
is recommended.
Firmware upgrade completed. The NVS2825 turns
off automatically.
232.6 GB
Auto PwrOff 50
Buzzer
On
Index AutoGen. Off
Folder Rename On
Motion Sensor Hi
Language
Firmware Update
Select Select Back Back