NextoDI NVS2825 - Manual (Page 33)

59
TROUBLESHOOTING TIPS TROUBLESHOOTING TIPS
60
20. Troubleshooting Tips
IF THE POWER ON THE NVS2825 CANNOT BE TURNED OFF :
The On/Off Button can be used as a reset key. In the event of a hardware or software
malfunction, press the reset button for at least 7 seconds. This will turn the power off
safely so that the data stored in the hard drive will not be lost or altered.
Press and hold
the key for more
than 7 seconds
Control Button
IF THE CONTROL KEY IS NOT RESPONDING :
If you are unable to select an operation that involves the pressing of the control key in
an up/down/left/right direction, you can still perform the [COPY] or [VERIFY] functions of
the NVS2825 by using the power (on/off) button.
First, turn on your NVS2825 by pressing the power button for over two seconds. Next,
place your memory card into the appropriate slot. When the LCD screen shows [SAFE COPY],
briefly press the power button to begin copying. Please note that you will be initiating the
“Safe Copy” function— which is slower, but is the most reliable method of backup.
When the copying is done, remove your memory card. Now re-insert the memory card and
wait until your NVS2825 asks [VERIFY?] A brief press of the power button will begin the
“Verify” process.
IF THE POWER CANNOT BE TURNED ON :
Press once and
release
immediately
The NVS2825 has an internal rechargeable battery.
If you cannot turn on the NVS2825 with the On/Off
button, it may be that the internal battery has been
discharged. Connect the power adapter to the
NVS2825 and push the power button for several
seconds to turn the NVS2825 on.
INSERT THE MEMORY CARD :
Insert the memory card carefully as shown below.
The pins may bend if you insert the memory card
incorrectly.
Press once and
release
immediately
Control Button