NextoDI NVS2825 - Manual (Page 4)

1. Product Description
The NEXTO VIDEO STORAGE-Air (hereinafter NVS2825) provides the following
various functions:
1.1. Memory card backup and verify
The NVS2825 contains a 2.5”SATA hard drive or SSD (Solid State Disk) and
a Li-Poly rechargeable battery. The NVS2825 can copy the contents of a memory
card to the internal hard drive without a PC--even in the field where no electric
power source is available.
You can copy SxS cards, CF (using a CF card adapter) and SD/SDHC/SDX(using a
SD card adapter) through the ExpressCard slot on the left side of the device. You
can copy Cardbus memory cards (including P2/P2E) through the Cardbus slot on
the top of the device.
The NVS2825 provides a verify function which compares the data stored on the
hard drive with that on the memory card.
For complete backup information, refer to Chapter 11 of this manual.
1.2. Video/Photo Preview and Audio play
The NVS2825 can display video footage taken with professional video cameras
on a color TFT LCD and can also enable the playing of sound through an audio
jack located at the bottom of the device. When previewing the copied data, you
can control the play speed from 1x up to 64x.
For details on Video Preview, see chapter 12.
1.3. Multi-Copy
The NVS2825 can copy the contents of a memory card to the internal hard drive
and to an external USB hard drive at the same time, allowing you to make two
copies in a single operation. For details of the Multi-Copy feature,
see chapter 14.
1.4. Sync
The NVS2825 can synchronize the contents of a folder with the folder on an
external USB hard drive. This allows you to quickly and safely make a secondary
copy of the backup folder to an external USB hard drive without the use of a
computer. For details of the Sync function, see chapter 15.
1.5. Computer connection
The NVS2825 can be connected via USB3.0, IEEE 1394b (FireWire 800) to a
corresponding port on a computer in order to copy data. For details regarding
Computer Connections, see chapter 10.
1.6. Button operation
All of the functions of the NVS2825 are controlled by two buttons, one for power
(On/Off) and the other for function controls (control key). The power button can
also be used as a function key in some instances. For details on Power (On/Off)
and control key operation, see chapter 8.
1.7. Internal/External rechargeable battery
The NVS2825 contains an internal Li-Poly battery that enables the NVS2825 to be
used without the power adapter. The power adapter is used to charge the
internal Li-Poly battery or the external battery. The power adapter also supplies
power to the main unit. The external battery is used to power the external HDD
when performing the multi copy/sync function. The external battery can also be
used to charge the internal battery. For details on Charging the Internal Battery,
see chapter 7.
1.8. Internal hard drive
The NVS2825 offers these functions for the internal hard drive:
[Hard drive Information]
[Hard drive format]
[Hard drive self test]
For details see chapter 9 and chapter 16.
1.9. Firmware upgrade
When NextoDI develops new functionality—or offers support for new video
formats--firmware is provided to users through the website’s download page.
You can download the new firmware to a memory card or the internal hard drive
of the NVS2825. You can then upgrade your NVS2825 using the firmware update
function of the NVS2825. For details, see chapter 16.
01
PRODUCT DESCRIPTION PRODUCT DESCRIPTION
02