0 gb, Menu off – NextoDI NVS2501 User Manual

Page 30

Advertising
background image

53

EXAMPLES OF BASIC FUNTIONS

EXAMPLES OF BASIC FUNTIONS

54

(5) If the copy is successfully completed, the result

will be shown on the LCD. Remove the SxS card

to return to the initial “XCopy ready”mode.

2. Copying a CardBus memory card (including P2/P2E)

Copy Done

Remove SxS

16/16 3.6 GB

98.7 GB

Off

10.7 MB/s

Copy Success

Copying a CardBus memory card

(including P2/P2E) is the same as

copying an SxS card-- except that the

CardBus memory card (including P2/

P2E) requires the CardBus memory card

adapter which is delivered with the

NVS2501. First, connect the CardBus

memory card (including P2/P2E) to the

CardBus memory card adapter, then

insert the card into the Express Card

slot of the NVS2501.

The NVS2501 will display an error

message if an empty CardBus memory

card adapter is inserted.

CardBus

Memory card

(including P2/P2E card)

3. Copying a CF/MD/SDHC/SDXC/MS card

The Memory card slot for a CF/MD/SDHC/SDXC/MS card is located on the top of

the NVS2501. Insert the CF/MD/SDHC/SDXC/MS card into the slot.

The remaining procedure is the same as for SxS memory cards.

145.0 GB

XCopy Ready

Menu

Off

CardBus

Memory card

Adapter

CF/MD Card

145.0 GB

XCopy Ready

Menu

Off

SDHC/SDXC/MS Card

145.0 GB

XCopy Ready

Menu

Off

When copying from a

USB device, the NVS2501

should be powered by the

AC power adapter.

The detailed connection

is shown above.

USB(mini-B)

USB Cable

USB(Standard-A)

Adapter(12V)

105.9 GB

Cancel

Detected USB

Checking...

3.6 GB

16 Files

105.9 GB

Cancel

Select

Copy USB?

Fast Copy

Copy & Verify

Safe Copy

Copying

4/16 20.1GB

105.9 GB

Cancel

0m30s

If the USB device is

connected correctly,

the NVS2501 will

automatically detect

the device and prepare

for Copying

Copying from a USB device:

After copying, remove the

USB cable connected to

the USB device.

4. Copying from an IKEGAMI GFPAK or a USB memory card reader

The NVS2501 supports copying from the IKEGAMI GFPAK or a USB memory card

reader. Simply attach the GFPAK or memory card reader to the “eSATA/USB-Host”

combo slot using the supplied USB cable

Advertising