NextoDI NVS2501 - Manual (Page 32)

57
TROUBLESHOOTING TIPS TROUBLESHOOTING TIPS
58
Control Button
Power On/Off
Button and
Select Button
IF THE POWER CANNOT BE TURNED ON:
The NVS2501 has an internal rechargeable battery. If you cannot turn on the
NVS2501 with the On/Off button, it may be that the internal battery has been
discharged. Connect the power adapter to the NVS2501 and push the power
button for more than 2 seconds to turn the NVS2501 on.
Adapter(12V)
Press and hold
the key for more
than two second.
21. Troubleshooting Tips
IF THE POWER ON THE NVS2501 CANNOT BE TURNED OFF VIA THE
ON/OFF BUTTON:
Press the RESET button using a toothpick or paper clip.
The RESET button will turn the power off safely so that the data stored in the hard
drive will not be lost or altered.
IF THE CONTROL KEY IS NOT RESPONDING:
If you are unable to select an operation that involves the pressing of the control
key in an up/down/left/right direction, you can still perform the [COPY] or
[VERIFY] functions of the NVS2501 by using the power (on/off) button.
First, turn on your NVS2501 by pressing the power button for over two seconds.
Next, place your memory card into the appropriate slot. When the LCD screen
shows [SAFE COPY], briefly press the power button to begin copying. Please note
that you will be initiating the “Safe Copy” function— which is slower, but is the
most reliable method of backup.
When the copying is done, remove your memory card. Now re-insert the
memory card and wait until your NVS2501 asks [VERIFY?] A brief press of the
power button will begin the “Verify” process.