NextoDI NVS2501 - Manual (Page 7)

07
DEVICE DIAGRAM ABOUT THE RECHARGEABLE BATTERY
08
5. Device Diagram
① DC IN" slot for AC power adapter unit (wall plug; 5~25V).
② Connector " Firewire 800 (IEEE 1394b)" to connect to the computer with max
800Mbps speed.
③ Combo slot for “eSATA” and “USB_Host”
● "eSATA" slot to connect to a computer. "eSATA" cable does not provide power,
so use the AC power adapter or connect USB/Firewire cable to PC when using eSATA.
● USB Host slot to connect USB external hard drive or IKEGAMI GFPAK or USB Blu-ray driver.
④ "USB” slot for USB2.0 device connection to a computer
⑤ Recessed Reset key, to be pressed with a tooth pick or similar tool;
switches off NVS2501 in the event of a hardware or software malfunction.
⑥ ExpressCard slot for SxS card and CardBus memory card (including P2/P2E)
connection. CardBus memory card (including P2/P2E) needs CardBus memory
card adapter which is included in the NVS2501 box.
⑦ LCD Display
⑧ Control key. Controls up/down/left/right/select of cursor when power is on.
⑨ Power key. Controls power on/off and selecting command when power is on.
⑩ Compact Flash slot
⑪ 3-in-1 connector for SDHC/SDXC/MS
①
②
③
④
⑤
⑥
⑦
⑧
⑨
⑩
⑪
6. About the Rechargeable Battery
A "Li-Poly" (lithium-polymer) rechargeable battery is integrated into the NVS2501.
This rechargeable battery does not have the so-called "memory effect"--
the rechargeable battery can be charged whenever you want. Furthermore,
it has a higher energy content than conventional NiCd and NiMH rechargeable
batteries. Note these important instructions when handling the Li-Poly
rechargeable battery.
The rechargeable battery can be recharged 400 times.
If the battery operation time gets shorter, it may be time to replace the battery.
Consult your authorized NEXTODI dealer to replace the internal battery.
Caution
● Never damage the rechargeable battery--do not remove it from
the NVS2501. Consult the chapter on "Battery Disposal". Damaging
the wrapping of the rechargeable battery might cause an explosion
or fire.
● Never short circuit the contacts of the rechargeable battery. Never
touch the connections or electrical components inside the NVS2501
with metal objects.
● Charge the rechargeable battery regularly, even if you do not use
the product. The NVS2501 needs some "current" (a small quantity)
at all times. Due to the Li-Poly rechargeable battery technology,
it is not necessary to discharge the battery before recharging.
Recharge the battery completely, about once a month. The device
will be ready for use at any time.