Petsafe Innotek Smart Dog® Rechargeable In-Ground Pet Fencing System - Manual (Page 2)

Innotek, Inc. (800)-826-5527 www.innotek.net
INTRODUCTION
Your new electronic containment system has a wall-
mount transmitter, a collar receiver, and boundary wire.
The wall-mount transmitter generates an electronic sig-
nal that is transmitted onto the boundary wire and is
received by the collar receiver when your dog
approaches the boundary wire. When the collar receiv-
er senses your dog is approaching the containment
boundary, the receiver will sound a warning tone fol-
lowed by a harmless, but effective electronic stimula-
tion. When trained properly, your dog will quickly learn
where his boundaries are. The system is designed to
contain dogs within a perimeter of up to 4175 feet
(enough for a square containment area of 25 acres).
This package contains insulated wire for enclosing a
yard approximately one-half acre in size. Additional
boundary kits can be purchased from Innotek by calling
1-800-826-5527. The system is also capable of con-
taining multiple dogs simultaneously. Although the sys-
tem is sold with one collar receiver, additional collar
receivers can be purchased from Innotek by calling 1-
800-826-5527.
This manual includes a Quick Start Guide for people
who are already familiar with electronic containment
systems. Additionally, a detailed description of the
transmitter, receiver installation procedure, training
guide, and a troubleshooting guide is included.
COMPONENTS
A. One waterproof collar receiver with reflective nylon
strap and quick-release buckle
B. One wall-mount transmitter with installation hard-
ware
C. One 24-volt, 400 milliamp AC adapter to power the
containment system
D. One lightning/power surge protector (SD-2200
model only)
E. One test lamp for testing the collar receiver
F. Fifty boundary flags
G. 20 ga. boundary wire (500 feet)
H. 20 ga. pre-twisted containment wires (100 feet) (SD-
2200 model only)
I. Interchangeable collar receiver probes for longhaired
and shorthaired dogs (one set each)
J. Black plastic training probes for use in the first train-
ing lesson
K. Four waterproof splices (wire nut and waterproof
capsule)
L. One probe wrench
M. Instructional training video
QUICK START GUIDE
READ THE IMPORTANT SAFEGUARDS SECTION
OF THIS MANUAL AND ALL CAUTIONS AND WARN-
INGS PRIOR TO INSTALLING AND USING THIS SYS-
TEM. IT IS RECOMMENDED YOU READ THE
ENTIRE MANUAL PRIOR TO INSTALLATION OR
USE OF THIS SYSTEM.
This Quick Start Guide is provided for people who are
already familiar with electronic containment systems. It
also serves as a quick visual index to the detailed
installation procedure included in this guide. If you find
you need more detail while using this Quick Start
Guide, simply refer to the procedure section referenced
for detailed instructions.
1. Layout your containment boundary (See Section
4.A, pg 7 for details)
Sketch your yard on a piece of graph paper and decide
where you would like to contain your dog. Section 4.A.
shows some sample layouts and provides some helpful
design tips. Before you decide where to bury your con-
tainment wire have your utility companies mark utility
lines.
2. Install the Wall-Mount Transmitter (See Section
4.B, pg 8 for details)
Select a dry, indoor location for the wall-mount trans-
mitter that is within five feet of a standard, grounded
110-volt household outlet. Attach the transmitter mount-
ing plate to the wall using the supplied hardware.
Remember to mount your transmitter in a location
A.
B.
H.
G.
M.
D.
F.
L.
E.
I.
C.
K.
2.
J.
QUICKSTART