Petsafe Pawz Away® Indoor Pet Barrier User Manual

Page 3

Advertising
background image

2

Customer Care Center 1-800-732-2677

www.petsafe.net 3

Proper fit of the collar is important. A collar worn for too long or made too

tight on the pet’s neck may cause skin damage. Ranging from redness to

pressure ulcers; this condition is commonly known as bed sores.

- Avoid leaving the collar on the dog for more than 12 hours per

day.

- When possible reposition the collar on the pet’s neck every

1 to 2 hours.

- Check the fit to prevent excessive pressure; follow the instructions

in this manual.

- Never connect a lead to the electronic collar; it will cause

excessive pressure on the contacts.

- When using a separate collar for a lead, don’t put pressure on the

electronic collar.

- Wash the dog’s neck area and the contacts of the collar weekly

with a damp cloth.

- Examine the contact area daily for signs of a rash or a sore.
- If a rash or sore is found, discontinue use of the collar until the

skin has healed.

- If the condition persists beyond 48 hours, see your veterinarian.
- For additional information on bed sores and pressure necrosis,

please visit our website.

These steps will help keep your pet safe and comfortable. Millions of

pets are comfortable while they wear stainless steel contacts. Some

pets are sensitive to contact pressure. You may find after some time that

your pet is very tolerant of the collar. If so, you may relax some of these

precautions. It is important to continue daily checks of the contact area. If

redness or sores are found, discontinue use until the skin has fully healed.
You may need to trim the hair in the area of the Contact Points. Never

shave the dog’s neck; this may lead to a rash or infection.

• To prevent an unintended correction, do not perform set up procedures while

the Receiver Collar is on your pet.

• If you are using a collar and leash for training, be sure the extra collar does

not put pressure on the Contact Points of the Receiver Collar.

To avoid damage to the transmitter do not use on wet surfaces, in damp or

wet locations or around swimming pools. This product is designed for indoor

use only. Do not expose to rain or snow.

Advertising