Pilz PSEN op4B-S-3-080 - Manual (Page 46)

PSEN op4B Series Operating Manual
42
- Application with two optoelectronic sensors: configured with
parallel intersecting beams
This solution is suitable for applications in which the object can only be
moved in one direction.
For correct operation set position 2 on the DIP switch to ON.
A
B
PSEN
Connecting the muting sensors:
Contact from A
Contact from B
24 Vcc
4-pin M12 connector
PSEN receiver
Pin 2
MUTING 1
Pin 4
MUTING 2
L
V=const.
D
Danger zone
• The beams must always intersect within the danger area.
• Muting sensors A and B must be operated within 4 s.