Ryobi TSS102L - Manual (Page 15)

15 − English
ASSEMBLY
TABLE EXTENSIONS
See Figures 12 - 14.
Table extensions have been provided for both the left and
the right side of the saw.
To install table extensions:

Remove the screw from the end of the table extension.
 Insert the ends of extension into the holes in the sides of
the base.
 Replace screw and tighten to secure the extension in
place.
 Repeat for other extension.
Fig. 13
Fig. 12
Fig. 14
SAW VIEWED FROM BOTTOM TABLE
EXTENSION
BASE
BASE
TABLE
EXTENSION
TABLE
EXTENSION
SCREW
BASE