Ryobi TSS102L - Manual (Page 19)

19 − English
ASSEMBLY
 If the front or back edge of the saw blade angles away
from the square as shown in figures 21 - 22, adjustments
are needed.
 Using the blade wrench provided, loosen the socket head
screws that secure the miter fence to the miter table.
 Rotate the miter fence left or right until the saw blade is
parallel with the square.
 Retighten the screws securely and recheck the blade-to-
fence alignment.
MITER
LOCK HANDLE
Fig. 20
MITER
TABLE
VIEW OF BLADE SQUARE WITH FENCE
SQUARE
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED Fig. 21
MITER
FENCE
MITER
TABLE
BLADE
BLADE
SQUARE
MITER
FENCE
Fig. 22
Fig. 23
Fig. 24
VIEW OF BLADE NOT SQUARE WITH
FENCE, ADJUSTMENTS ARE REQUIRED
MITER
TABLE
SQUARE
MITER
FENCE
SCALE
INDICATOR
SCALE
INDICATOR
INDICATOR
SCREW
INDICATOR
SCREW
BEVEL
SCALE
MITER
SCALE
BLADE
BEVEL
LOCK KNOB