Y-cam Classic Range - Manual (Page 19)

Page 19
Explanation of Operating Bar
1) Mute. Click the Mute button to mute the audio.
2) Slide the slide block horizontally to adjust volume.
3) Snapshot. Press the Snapshot button to capture a still image of the
camera view. Click Save to store the snapshot on your computer, the file
is automatically assigned the data & time of the snapshot. Press Cancel
to exit.
4) Zoom. Click on the + button and the cursor turns to a magnifier. Move
the magnifier to the desired location and click on an image area. Press ‐
button to return to the normal view.
5) Recording: Press the Record button to record video and audio (if
enabled). This will save the file in ASF format on your PC.
6) Recording options: Click this button to set the recoding parameters.
You can set record path, video file size and select whether to star
recording automatically when motion is detected and the length of the
recording in seconds.
7) Image size: There are three Image Size options:
[640x480]
[320x240]
[160x120]
Please note that this only changes the image size being viewed not the
image size the camera is transmitting and/or recording. To change the
transmitting/recording image size please refer to the Stream Setup.