Y-cam Classic Range - Manual (Page 38)

Page 38
6.3 Alarm Menu
The Alarm menu is located on the right of the Settings screen. When you click on the word “Alarm”, a sub‐menu of
alarm setup options will be displayed.
6.31 Motion Detection (Internet Explorer)
Motion Detection is only available for setup when using Internet Explorer.
Motion Detection can trigger an alarm that sends images via e‐mail or FTP (File Transfer Protocol). You can set up to four
different Motion Detection windows.
[Window] Check this box to enable the window.
[Threshold] Set the threshold bar to the amount of motion required to trigger the alarm.
[Sensitivity] Set the measurable difference between two sequential images that would indicate motion.
Note: Sliding the Sensitivity bar to the left will decrease the sensitivity of the motion detection i.e. ‘More’ movement is
required to trigger the alarm. The best way to configure these settings is to adjust the settings and have someone walk in
front of the camera until your feel you are getting the required results. This trial and error method make take quite long
to get right but it’s the best way to obtain good results.