Y-cam Classic Range - Manual (Page 46)

Page 46
6.42 E‐mail Servers
The Y‐cam can be configured to send an E‐mail when the Motion Detection alarm is triggered or It can send a snapshot
after specified intervals.
The Y‐cam can be configured with 4 different E‐mail servers. These servers can be individually connected to either send
on motion detection or send periodically. These functions are available under the Alarm menu.
[e‐Mail server ID] Select the email server ID. You can set up to four email servers.
[SMTP server name] Type the name or IP address of the SMTP server you want to use for sending the e‐Mails. Please
note that some networks do not allow e‐mail relaying. Check with your system administrator or Internet service provider
for more details.
[SMTP server port] The port number of the e‐mail server (default is 25).
[Secure SSL Connection] Select whether your SMPT server requires an SSL connection.
[Authentication] Select whether authentication is required by the SMTP server.
[User name] & [Password] Type the user name and password of the e‐mail account you wish to use. This field is
required if your SMTP server requires authentication.
[Re‐type password] Re‐type the password.
[Sender e‐mail address] Type the e‐mail address of the account you are using to send the e‐mail. This will be the address
the emails come from.
[Receiver e‐mail address] Type the recipients’ e‐mail addresses for who you want the emails to be sent to. Up to 3
address can be entered.