Y-cam Classic Range - Manual (Page 28)

Page 28
6.13 OSD Setup
Click on OSD Setup under the title Camera to change the on‐screen display parameters of the camera.
On Screen Display Setting Options
[OSD] Enable or Disable the On Screen Display.
[Transparent] Select whether OSD should have a transparent or solid background.
OSD Options
[Display date and time] Sets the OSD to display the Date and Time of the camera. Please note that this function will
simply display the date and time that has been programmed in the camera and therefore the time and date may be
incorrect unless the camera is synchronized to a time and date server on the internet. This is accessible under the Tools
menu and will be covered in more detail in the manual.
[Display system name] Set the OSD to display the System Name of the camera. The system name can be modified from
the System Identity page, accessible under the Tools menu, and will be covered in more detail in the manual.
[Display the text below] Set the OSD to display specific text. Use the text field to input the desired text.
[Display the text below with date and time] Set the OSD to display specific text with date and time. Use the text field to
input the desired text (Maximum of 6 characters).
Once you have set your required settings, click “Apply” to save them.