Canon Digital Video Camcorder ZR20 - Manual (Page 107)

107
E
Additional Information
Recording reminder
When you start recording, the
camcorder counts from 0SEC to
10SEC. Shots which are shorter than
ten seconds may be difficult to edit
later. On the other hand, if you are not
planning to edit the recording,
remember that a shot which does not
contain action should generally last no
longer than 10 seconds.
Time Code
This records counter information,
including hour, minute, second, and
frame number on a special data code
area on the tape itself. It is reset
automatically when a new tape is
loaded. In CAMERA mode, the frame
number doesn’t appear in the display.
0sec
10sec
0:12:34:12
AUDIO IN
MIC.IN
DV IN
ST–1 ST–2
The wind screen is
turned on (
60).
Volume level
(
29):
Speaker
Headphones
The AV/headphone
terminal is switched
to headphones
(
30)
Audio output ( 85)
Mix balance ( 85)
Audio input ( 83)
Microphone input
DV input ( 75)
Condensation warning
(
96)
WS ON
+ –
VOLUME
OFF
VOLUME
+ –
PHONES
PHONES
STEREO1
STEREO2
MIX/FIXED
MIX/VARI
5_ZR20_E(88-114) 3/12/01 13:53 Page 107