Canon Digital Video Camcorder ZR20 - Manual (Page 86)

86
E
Editing
When you play back a tape whose audio has been recorded on multiple channels,
you can change the output channels of that sound.
1. Load a tape recorded with multiple-channel audio.
2. Open the menu and select VCR SET UP. Then select OUTPUT CH,
set it to the desired setting and close the menu.
• Refer to the following list.
PLAY
(VCR)
Selecting audio output channels
Tape recorded on
multiple channels
main + sub
main only
sub only
OUTPUT CH setting
L/R
L/L
R/R
Played back sound
Tape recorded with
stereo sound
L+R channels
L channel only
R channel only
OUTPUT CH•••L/R VCR SET UP
( 36)
4_ZR20_E(74-87) 3/12/01 17:38 Page 86