Axesstel PST - Manual (Page 108)

AXESSTEL Software User's Guide Contents
requested. Again, the PST log files can indicate these events as
having happened.
Example
srch_95b_soft_ena 200 4 6 1
Response
This command enables IS-95B soft-handoff by Retriever with a soft
slope of 200, Add Intercept value of 4, Drop Intercept of 6, and the
Report OTA Threshold enabled as appropriate for a Lucent or
Motorola network.
ST (analog test command)
Starts or stops the transmission of signaling tone.
Syntax st
on | off
Example
st on
Response
Starts transmission of the signaling tone.
TERMINATE (analog test command)
Stops RCVERSUS1 or WSTS and reports the counts.
Syntax terminate
TIMESTAMP
Allows the user to request that a time stamp be retrieved from the
phone and displayed on the scripting screen. Time stamp is
displayed in the format MM/DD/YY HH:mm:ss.hhh, where MM is
month, DD is day, YY is year, HH is hour, mm is minutes, ss is
seconds, and hhh is milliseconds.
Syntax timestamp
Script Command List
TO_DATA_MODE
Directs the phone to switch to data operation mode (where the AT
command processor is) instead of normal diagnostic mode.
Syntax to_data_mode
TXMUTE (analog test command)
Mutes or unmutes the transmitter audio signal.
Syntax txmute on | off
Example
txmute on
Response
Mutes the transmitter audio signal.
VERSION_REQUEST
Returns the information in the Version Number Response Packet
which is similar to what is displayed in PST’s Mobile Version
i
AXESSTEL Proprietary
108