Axesstel PST - Manual (Page 92)

AXESSTEL Software User's Guide Contents
_ LAYER2 = Layer 2 Statistics
_ ALL = All of the above
Syntax parm_get MUX1 | MUX2 | PAGE | ACCESS | LAYER2 | ALL
Example parm_get access
Response The PST displays the access channel statistics as follows:
Access Channel Statistics 5/20/93 16:26:47
*Acc Chn req msgs 740
*Acc Chn rsp msgs 0
*Probe Tx > 1 17
*Probe Tx > 2 8
*Probe Tx > 3 4
*Probe Tx > 4 3
*Probe Tx > 5 1
*Num of failed attempts 0
PARM_SET
Sets the specified parameters. A -1 value clears all parameters.
Syntax parm_set parm_id
[value]
Example
parm_set -1 0
Response
All parameters are cleared (reset to zero).
PASSWORD
Allows the user to send the phone’s security password. This is the
password associated with the DMSS Security Plan, not to be
confused with the Service Programming Code. If a phone has this
password set, sending this command with the correct password will
unlock secure features (memory peek/poke, port I/O). If the wrong
password is sent, the phone powers off. The password argument is
a 16-character string of hexadecimal digits (0–9, A–F), representing
the 8-byte password of the phone.
Syntax password “password”
Example
password “0123456789abcdef”
Response
The security password of 0x0123456789abcdef is sent to the
phone to unlock the secure features of the phone.
Script Command List
PAUSE
Stops reading commands from the script file until a keystroke is
entered.
AXESSTEL Proprietary
92