Axesstel PST - Manual (Page 96)

AXESSTEL Software User's Guide Contents
RUN
Starts executing commands from a script file. This also allows one
script file to execute another.
Syntax run [script_file_name]
Example
run test0001.scr
Response PST starts running the test0001.scr script file. This command is
entered on the command line or contained in a script file. When
entered on the command line, the file is opened and commands are
parsed and executed from the beginning of the file to the end. When
this command is contained in a script file, the position in the current
file is remembered, the new file is run, then processing is resumed in
the original file. Nesting of files up to five deep is supported.
Script Command List
RXMUTE (analog test command)
Mutes or unmutes the receiver audio signal.
Syntax rxmute on | off
Example
rxmute off
Response
Unmutes the receiver audio signal.
SATOFF (analog test command)
Disables the SAT (supervisory audio tone) transmission.
Syntax satoff
SATON (analog test command)
Transmits a SAT (supervisory audio tone). Value may be 5970, 6000,
or 6030 Hz.
Syntax saton [value ]
Example
saton 6000
Response Transmits a SAT at 6000 Hz.
SCAN_CONFIG
Lets you alter the Pilot Scanner’s PN search parameters and
algorithms.
The scan_config command requires you to you specify the values of
all parameters even if you want to change only one of them.
For a detailed description of each scan_config parameter, see
Syntax scan_config scan_mode incr win_siz integ ho_typ log_fmt log_thr
The following table lists the possible values for each parameter:
Parameter Value
AXESSTEL Proprietary
96