Axesstel PST - Manual (Page 89)

AXESSTEL Software User's Guide Contents
HAT_DOWN HAT Down press
HAT_LEFT HAT Left press
HAT_RIGHT HAT Right press
RELEASE Key to note that all keys are up
Name Definition/Value
KEY_HOLD
Sends a key press to the phone without release as if you were
holding the key down.
Syntax key_hold [key]
Example
key_hold pwr
Response
The end key is sent to the test phone; and if it is a axesstel phone,
it will actually power off.
LOAD_SYNTH (analog test command)
Tunes the synthesizer to a given channel (analog only).
Syntax load_synth [channel]
LOGGING
Turns data logging on and off from the scripting screen command
line or in a script file. This command is equivalent to typing Alt+L
from anywhere in PST. If using this command to turn logging on,
you can optionally specify a file name to which the log will be
written.
Syntax logging on [“filename”]| off
Example
logging on
Response
PST starts polling the test phone for logging messages.
LOGMASK
Used to change the current log mask from the scripting screen or in
a script file. If logging is on when this command is executed, the new
log mask is sent to the phone. If not, the log mask is set in PST
Syntax logmask [mask_value].
Where mask_value is the new log mask to change.
Script Command List
Example
logmask 0XFFFFFFFF
Response
This turns on all possible logging fields in the current log mask in
PST.
MODE
Requests a mode change of the subscriber station. Many test
AXESSTEL Proprietary
89